Miller Magazine Issue: 153 September 2022

70 COVER STORY MILLER / SEPTEMBER 2022 the system, fills into the machine bran reservoir and it is sucked with a sucking fan which is connected from outside to the system.Bran from this machine is used in animal feed industry. 2.2. WATER POLISHER The water polishing machine is installed according to the processing order of the milling machine and it’s used in the polishing process of rice. The machine enhances the quality by polishing by means of the pieces in the pie. It is pushed towards the machine's product handling cage by the pusher coil located in the brass machine entering into the product entry bin of the machine. The brass pushed by the spiral gathers a brilliant appearance by rubbing the curtains in the machine with the striking lantern sweeping. The bran coming out during the friction is conveyed out of the sieve pores by the compressed air system. The shining brass is shipped from the rice outlet bin. The brass print cover on the machine's brass outlet res- ervoir is used to shine the rice on the desired calf. Bright- ness adjustment is performed by moving the cover back and forth. As the print lid is tightened, the brightness of the rice grain increases. As loosened, the grain brightness de- creases. As the moisture content of the processed product changes, it is also necessary to control the machine's pres- sure lid adjustment and bring the appropriate setting. 3. CLASSIFICCATION SECTIONS This section is the place where it is separated according to its aspect ratio and good - bad condition. 3.1. RICE PLANSIFTER Rice Plansifter; using in rice mill plant, rice powder, soil, powder broken, zero broken, broken, and rice is the machine that provides classification. The Plaster Rice Sieve is processed in rice processing plants by separating the brass from the crumb and polishing it after it is polished. The brass product entering the Plaster Rice Sieve product entry bin is distributed in both directions in a balanced man- ner through the distribution box. Rice floated on the sieves with vibratory circular shakes of the machine are classified according to the sizes of the sieved sieves used. The rice remaining on the sieve moves towards the outlet chamber through the product outlet paths in the sieve. The rice falling down the sieve pores starts to be sifted in the second sieve. In the same way, the product which is sifted in the second sieve and left on the sieve is conveyed to the product outlet by the product outlet routes in the sieve. Once the brass has entered the machine, it is sifted in five sieve systems. As a result, rice; from the outlet of the rice outlet, from the broken rice outlet, from the outlet of the broken rice, and from the broken outlet of zero. If desired, the machine can be sepa- rated from the soil by inserting a sieve into the sieve vessel 3.2. RAW GRAIN TRIEUR Raw Grain Trieur machine is a machine that picks up the ripen rice and sifts it apart. The Raw Grain Trieur, which is set up during the procedure, is used to sep-